Electrix Repeater - Manual (Page 9)

English... 9
FRONT PANEL
1 8 1 9 2 0
2 1
2 2
2 3 2 3 2 3 2 3
2 4
2 4
2 4
2 4
2 5
2 6
2 7
2 8
Play - Play immediately starts the loop at the begin-
ning. To achieve a stuttering effect, press and hold
Stop then rhythmically press Play to trigger the
loop. You can restart the loop even while it is playing
by pressing Play.
Record - press Record to enter and leave record-
ing. Pressing Record on Repeater also engages
P l ay for you. With an empty loop, pressing
Record also defines the downbeat. Recording can
be undone with the UNDO feature.
Tempo - can adjust the tempo of the loop in real-
time. The range of the tempo control may be limited
by the speed of the storage device. Repeater's has a
tempo range of 1 BPM up to 150% of the recorded
tempo. See LOOP EDITING for details. This control is
also used for Slip, Pan and Pitch edits.
Sync - selects the clock master. In beat detection
mode Repeater tracks the tempo of the incoming
audio and acts as a master clock with MIDI. In MIDI
mode, Repeater slaves to incoming MIDI clock. In User
mode, Repeater will clock to the tempo set with the
Tempo knob or the Tap Tempo Function. See
LOOP SYNC for details.
Slip - offsets the start point of a given track or com-
bination of selected tracks with the tempo knob. See
LOOP EDITING for details. Twist the Tempo encoder
quickly for larger steps and slowly for divisions of
each beat.
Pan - selected tracks are panned with the Tempo
knob.
Pitch - selected tracks are pitch shifted within a
range of -2 octaves through +1 octave. Twist the
Tempo encoder quickly for large steps and slowly
for cents.
Tap Tempo - in User Sync mode, the Tap Tempo
is used to establish the tempo of the current loop. In
Beat Detection mode, the Tap Tempo button can
be used to help the software find the beat of the
incoming audio by tapping along with the beat.
Tempo Lock - In beat detect mode, activation of
the tempo lock feature locks the unit tempo to the
currently detected beat, allowing only minor varia-
tions for tracking. In user mode, activation of tempo
lock forces all newly loaded loops to run at the
current user tempo.
Track Select Buttons - operations such as
record, re-sample, pan, pitch, slip, and FX insert all
use the Track Select buttons to determine which
tracks an operation is carried out on. You can select
any or all tracks for editing.
Track Levels - these control the levels of each
track to the main outputs.
FX Insert - assigns the FX loop to the input, an
individual track, or any combination of tracks. The FX
loop is post fader and pan. See RECORDING LOOPS for
details.
Re-sample - records the selected tracks and the FX
inserts to an individual track or a stereo pair of tracks.
See GETTING STARTED for details.
Headphone Output & Level - a headphone output
and volume control makes Repeater a stand-alone
recording device. Especially suitable for that 3:00
A.M. inspiration that can't wait 'til morning.
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8