Dake Model LE 13A - Manual (Page 11)

12/10/07 Model LE13A Text 11
SECTION 4
4.1 Control Panel Description
1. POWER LIGHT
This light will come on when the circuit breaker is ON.
2. EMERGENCY STOP BUTTON
When this button is depressed, all machine operations will stop.
3. BLADE DRIVE BUTTON
When this button is depressed, the saw blade motor, cutting fluid pump and the
chip removal system will begin to operate and the saw head begins to descend.
The saw head descends quickly until the quick approach arm makes contact with
the work and thereafter, it will descend at the designated cutting speed.
NOTE:
a. On the manual operation, if the front vise is not closed, the saw blade motor
will not operate and saw head will not descend even if the button is
depressed.
b. With the rear vise stop position switch set at
depressing this button will not operate the saw blade motor unless the rear
vise is at the forward limit position. (Manual Operation)
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16