Summers Disk-Chisel - Manual (Page 66)

DECALS 9/5/2007 9CC3212.iam/
8Z0276
8Z0346
8Z0202
8Z0087
8Z0344
8Z0800
8Z0342
8Z0087
8Z0344
8Z0800
8Z0348
8Z0075
8Z0810
8Z0344
8Z0805
8Z0342
8Z0805
8Z0342
8Z0344
8Z0202
SECTION 2 – WARNING DECALS (ALL SIZES)
2-54
1. Install danger, warning, and caution decals.
– Part numbers can be found on lower right hand corner of each decal. Match this number with
number on decal location drawing on Page 1-6.
– The drawing gives approximate locations of decals. Decals must be clearly visible.
– Order replacement decals if any are damaged.
2. Install refl ectors.
– Amber refl ectors are part # 8Z0800, these should be placed on front corners and sides of
machine in transport position.
– Red-orange refl ectors are part # 8Z0805, these should be placed on outside back of machine
in transport position.
– Red refl ectors are part # 8Z0810, these should be placed on outside back of machine in
transport position.
3. Install Safety Light Kit, see Page 6-16 for mounting layout.