Summers Disk-Chisel - Manual (Page 105)

MH MNTNG ARM ASSY 5/12/2009 8H2314.iam/
A
8X0073
1/2 X 5"
8X0123
3/4" X 5.5"
8X0099
5/8" X 6-3/4"
8X0304
5/8" LW
8X0250
5/8" N
8H2100
8X0261
3/4" LN 8X0242
NY-LOCK 1/2" N
8X0118
3/4 X 4"
8X0014
1/4 X 3"
8X0222
1/4" LN
8X0261
3/4" LN
8H2184
8W1204
1/2 X 3 X 3"
8H2190
8H1280
ARM LENGTH
8H2132 - 34"
8H2142 - 42"
8H2144 - 52"
8H2120
FRAME SIZES
WING-ARM TRAVEL STOP
MATCH LOCATION LETTER
ON SUPPORT ROD ASSEMBLY
WING-ARM TRAVEL STOP
DO NOT OVERTIGHTEN
ARM MUST BE FREE TO ROTATE
C
B
A
A B
C
8Z0101
SMC DECAL
8Z0052
PATENT DECAL
8X0306
3/4" LW
8X0117
3/4 X 7"
8X0246
1/2" FN
3"
4"
5"
6"
2 1/2"
8H1394
8W1897
8H1315
8D5219
8H1306
8H1327
8H2131
8X0269
SECTION 6 – PARTS
6-23
1. 52” mounting arms (PN 8H2314) should be used when attaching Summers mounted harrows.
2. Mounting arm location can be found on the following layout drawings.
– In certain locations, the mounting arm will be installed directly behind a liftarm pivot. A
spacer block has been welded to the chisel plow frame so there is no interference be-
tween u-bolts and mounting head.
NOTE: Make sure that if one mounting arm rests against a spacer block, the other mounting arm,
on that section, also rests against a spacer block.
3. Adjust harrows according to performance desired.