Videoswitch CMOR D3 Dome - Manual (Page 20)

CMOR Dome
Videoswitch Page 16 Vc607a.doc
4.6 Camera
4.6.1 Camera settings
4.6.1.1 Day Settings (Lamps OFF)
These settings apply when the IR lamps are not on.
4.6.1.1.1 Shutter Speed
The shutter speed may be slowed down to achieve greater light sensitivity. Normally this
should be set to AUTO.
4.6.1.1.2 Exposure Compensation
The brightness of the imagfe can be adjusted here
4.6.1.1.3 Joystick Focus Mode
There are two settings; Auto & Manual. The default setting for DAY is AUTO.
4.6.1.1.4 Preset Focus Mode
There are two settings; Auto & Stored. The default setting for DAY is AUTO.
4.6.1.1.5 Zoom Limit
The zoom limit can be adjusted from1 – 100%
4.6.1.1.6 Backlight compensation
Backlight compensation can be turned ON or OFF
4.6.1.1.7 Noise Reduction
4.6.1.1.8 Wide Dynamic Range
4.6.1.1.9 High Resolution Mode
4.6.1.1.10 Image Stabiliser
4.6.1.2 Night Settings (Lamps ON)
These settings apply when the IR lamps are on.
4.6.1.2.1 Shutter Speed
The shutter speed may be slowed down to achieve greater light sensitivity. Normally this
should be set to AUTO.
4.6.1.2.2 Exposure Compensation
The brightness of the imagfe can be adjusted here
4.6.1.2.3 Joystick Focus Mode
There are two settings; Auto & Manual. The default setting for DAY is AUTO.
4.6.1.2.4 Preset Focus Mode
There are two settings; Auto & Stored. The default setting for DAY is AUTO.
4.6.1.2.5 Zoom Limit
The zoom limit can be adjusted from1 – 100%
4.6.1.2.6 Backlight compensation
Backlight compensation can be turned ON or OFF