AMETEK 955S Smart Brik LDT User Manual
Page 5
5
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax 248.435.8120 • www.AMETEKAPT.com
Mounting brackets (SD0522000) slide in the grooves
on the side of the extruded housing. When tightened
down with fastening hardware the mounting brackets
clamp the unit into place. It is recommended to use
one mounting bracket on each end and every three
feet between.
A standard female swivel mounting arm is
provided with the slide magnet assembly.
For extensions and other options contact the
factory.
A standard 12 mm 4 pin micro connector is used. Straight mating cables can
be ordered in a 6’ length, or 12’ length. If space is a consideration a right angle
connector is also available.
WARNING
Do not use cord sets with LED’s
.25
OF MAGNET SLUG
Sensing Surface
N
S
Floating Magnet Assembly (SD0522100)
NOTE 1: The north pole of the magnet should be
pointed towards the probe.
NOTE 2: If using the Floating Magnet Assembly option,
you must set Automatic Gain Control. See page 3.
Dimensions
CL
- 925 Linear Cable Reel Sensor (1 page)
- 925 Linear Cable Reel Sensor (2 pages)
- 925 Linear Cable Reel Sensor (8 pages)
- 955C Brik (71 pages)
- 950 MD Mill Duty Housing LDT (10 pages)
- 952 BlueOx LDT (36 pages)
- 953 VMAX LDT (18 pages)
- 955 eBrik (6 pages)
- 955 eBrik (2 pages)
- 955A Brik LDT (4 pages)
- 955D LDT (12 pages)
- 955DQ Brik LDT (24 pages)
- 955LC Brik LDT (1 page)
- 956 Blok Housing Option (2 pages)
- 957 SSI Brik (20 pages)
- 1970 Drive Check Control (4 pages)
- 1980 Rotating Cam Limit Switch (20 pages)
- 1980R Rotating Cam Limit Switch w/Resolver (20 pages)
- 1986 DN DeviceNet Resolver (20 pages)
- 1986I 4 (2 pages)
- 7014 Unifloat Level Float Sensors (4 pages)
- 7230 HT Digital Probe (2 pages)
- 7230 HT Digital Probe (25 pages)
- 7330 Pro-Stik II (2 pages)
- 7330 Pro-Stik II (12 pages)
- 7100 Leak Detect Stik (4 pages)
- 7100 Leak Detect Stik (22 pages)
- 7250 Digital Stick (2 pages)
- 7250 Digital Stick (11 pages)
- 1500 Induction Style Relay (6 pages)
- 5200 Solid State Relay (4 pages)
- 5400 Plug In Style Solid State Relay (2 pages)
- Over Temperature Protection (2 pages)
- Electro-Thrust Shoe Brakes (2 pages)
- 1746 LDT Interface Card (28 pages)
- 1746 LDT Interface Card (2 pages)
- 1746 LDT Interface Card (24 pages)
- 1990 DN DeviceNet Resolver Interface Module (20 pages)
- 1995A Micro-Set PLS (38 pages)
- 1995B Micro-Set PLS with Brake Monitor (40 pages)
- 1995L Micro-Set PLS (33 pages)
- 2110 Shut Height Monitor (59 pages)
- 2120 PLC Interface Module (64 pages)
- 1025 Foot & Palm Switches (24 pages)