Sts-1 standby alarm traps -28 – ADTRAN 4200659L1 User Manual
Page 74
Chapter 3. Configuration
3-28
MX2800 STS-1 User Manual
61200659L1-1
STS-1 Standby Alarm Traps
Trap
If enabled, the unit issues a trap when...
LOS
(Loss of Signal)
The controller card has lost the network receive
signal.
LOF
(Loss of Framing)
The controller card detects a loss of framing
from the network.
LOMF
(Loss of Multiframe)
The controller card detects loss of H4
multiframe from the network.
AIS-L
(Line Alarm Indication Signal)
The controller card is receiving a line alarm
indication signal. Line AIS defect is detected as
a "111" pattern in bits 6, 7, and 8 of the K2 byte
in five consecutive frames.
AIS-P
(Path Alarm Indication Signal)
The controller card is receiving a path alarm
indication signal. AIS-P is defined as all ones in
bytes H1, H2, and H3 as well as all ones in the
entire STS synchronous payload envelope.