ADTRAN NetVanta 1224R PoE - Manual

Solution Benefits
■
Converged LAN/WAN
architecture
■
Lower total cost of ownership
■
Efficient bandwidth usage
■
Space-savings, equipment
consolidation
■ Simplified network
administration
Product Features
■
Full-featured, managed
Layer 2 switch-routers
■
24-port Ethernet, Fast
Ethernet, and Gigabit
Ethernet functionality
■ Unique all-in-one
switching/ routing/
firewall/VPN platforms
■
Interoperable in established,
multi-vendor networks
■
8.8 Gbps switching capacity,
non-blocking
■
Gigabit SFP/1000Base-T
uplink/stacking capability
available
■
Stacking up to 16 switches
with single IP address
management
■
Link Aggregation, GVRP,
and LLDP
■
MAC-based port security
■
SIP ALG for NAT traversal in
VoIP applications
■ Easily recognizable Command
Line Interface (CLI)
■
Intuitive web-based Graphical
User Interface (GUI)
■
Free firmware updates
■ Industry-leading support,
service, and warranty
NetVanta 1224R PoE/1224STR PoE
All-in-One Network Access with Power of Ethernet: Modular WAN
interface, Firewall, Ethernet Switch, IP Router, and Optional VPN
The NetVanta 1000 Series from ADTRAN is
a standards-based, non-blocking Layer 2
switching solution suitable for converged
LAN/WAN access, interconnecting LAN devices,
for network segmentation, or for powering
LAN network devices. The NetVanta 1224R
PoE (Power over Ethernet) and 1224STR PoE
are unique, all-in-one access platforms that
combine a 24-port Ethernet switch, an IP access
router, a modular WAN interface with built-in
NTU, a stateful inspection firewall, and the
option for Virtual Private Networking (VPN),
all in a single 1U chassis. The 1224R PoE and
1224STR PoE provide 24-port Ethernet and
Fast Ethernet switching, with the 1224STR PoE
offering two extra 1000Base-T/SFP Gigabit ports
for uplink or stacking capability.
Modular Hardware
A single WAN access slot in the back of the
NetVanta chassis supports a variety of Network
Interface Modules (NIMs) including E1/FE1,
E1/FE1 with G.703, ADSL, SHDSL, Serial,
T1/FT1, T1/FT1 with DSX-1, or a Dual T1
interface. The optional Analog or ISDN BRI
Dial Backup Modules (DIMs) support a solid
business continuity plan by dialing around a
failed circuit to any PPP-compliant device.
The ADSL NIM may also be used for broadband
backup, allowing for larger bandwidth
applications and faster data rates.
Standard-based Protocols
Based on the ADTRAN Operating System (AOS),
these devices offer support for 802.1Q Virtual
LANs (VLANs), port-based switching features
include Broadcast Storm Control, 802.1D and
802.1w Spanning/Rapid Spanning Tree, Link
Aggregation, Port Mirroring, and GVRP. Link
Layer Discovery Protocol (LLDP) auto-discovers
neighboring Ethernet devices, simplifying inte-
gration into multi-vendor environments. In
addition, the integral IP router provides costef-
fective Internet access, corporate Frame Relay
or point-to-point connectivity using standard
routing protocols such as BGP, OSPF and RIP.
Power over Ethernet
The NetVanta 1224R PoE and 1224STR PoE
platforms provide standards-based 802.3af PoE
functionality for powering IP phones, Wireless
Access Points (WAPs), or other devices requiring
LAN power. The products support up to 15.4
watts per port or 370 watts total.
Security
Rest assured, with the NetVanta 1224R PoE
and 1224STR PoE your network is protected.
Each platformcomes standard with a stateful
inspection firewall to stop intruders and
common Denial of Service (DoS) attacks.
These products also offer a variety of data
security features including MAC-based port
security, multilevel user passwords, Secure
Shell (SSH) and Secure Socket Layer (SSL) for
encrypted user login, and Access Authentication
and Authorization (AAA) with RADIUS, RSA
SecurID, or TACACS+. For added security, these
platforms offer a VPN upgrade supporting up to
500 IPSec tunnels using DES, 3DES or
AES encryption.
Quality of Service (QoS)
The NetVanta switch-routers support QoS to
prioritize mission critical traffic and control
network congestion at various layers of the OSI
model. On the LAN, the NetVanta 1000 Series
offers 802.1p and DiffServ Class of Service
(CoS). To assign priority to traffic, Weighted
Round Robin and Strict Priority Queuing is used
with four egress queues per port. For the WAN,
DiffServ marking, Low Latency Queuing, and
Weighted Fair Queuing provide priority for IP
packets routed over the WAN. Together these
features offer a powerful end-to-end QoS story.
VoIP Ready
In combination with the QoS features, a special-
ized SIP Application Layer Gateway (ALG) allows
SIP traffic to traverse NAT-enabled firewalls.
For an enterprise network, this interoperability
allows IP PBXs, phones, and other SIP-based
devices to set up, tear down, and pass voice and
call control messages seamlessly through the
integral NAT-enabled firewall.
Administration
The AOS offers both a Command Line Interface
(CLI) that mimics the widely deployed, industry
de facto standard and an intuitive web-based
GUI with step-by-step configuration wizards.
For a centralized enterprise-wide management
scheme, ADTRAN offers n-Command, an
intuitive, scalable software suite for managing
firmware revisions, push firmware upgrades
and configuration changes, backup and restore
configurations, and manage security policies
and Access Control Lists (ACLs).
International
www.adtran.com/global
ADTRAN NetVanta products
are VoIP-Ready! Inherent
QoS functionality supports
Voice over IP needs!