ADTRAN 4200659L1 - Manual (Page 149)

Chapter 9. Transaction Language 1 (TL1)
61200659L1-1 MX2800 STS-1 User Manual 9-3
currently supports two types of acknowledgment messages: In
Progress (IP) and All Right (OK).
In Progress
The IP acknowledgment message is usually generated as an interim
response message to indicate that a message has been received and
that the command is being executed. IP messages have the
following general format:
All Right
The OK acknowledgment message indicates that a command has
been received and that the required action was initiated and
completed. This message has the following general format:
Output Response Messages
Output Response messages are generated in response to received
commands and have the following general format:
For the MX2800 STS-1, the C OMPLETION C ODE field will contain
one of the following values:
• COMPLD - Successful execution of the received command
• DENY - Denial of the received command
When the received command is denied, the line in the message
following the
C OMPLETION C ODE line will contain a 4-letter error
code. See the section TL1 Error Codes on page 9-13 for a
description of possible MX2800 STS-1 error codes.
IP
<
OK
<
--
M
(||)*
(;|>)