ARI Armaturen ES11 EN - Manual (Page 4)

Page 2-4 Rev. 0040601000 1014
Operating and installation instructions 
Electronic positioner ES11
4.4 Split range
In split range mode, it is possible to utilise only part ranges of the entire actuating signal. 
For example, the actuating signal 0...20 mA sets the part range 50...100%, which
corresponds to the range 10...20 mA.

The part ranges are set with the zero point adjusting screw (N) and with the slope span
adjusting screw (S).

Infinitely variable part ranges over 20% are possible. 
The smallest possible part ranges are specified in the table below.
0-20% 0-40% 0-60% 0-80% 0-100%
20-40% 20-60% 20-80% 20-100%
40-60% 40-80% 40-100%
60-80% 60-100%
80-100%
4.5 Dimensions
fig. 1