Red Lion NT100 - Manual (Page 2)

2
POWER
Either V
1
or V
2
can be connected to power for minimal operation. For
redundant power operation, V
1
and V
2
plugs must be connected to separate DC
Voltage sources. Use wire sizes of 16-28 gauge.
NOTE: Must use an NEC Class 2 or Limited
Power Source (LPS) rated power supply.
MOUNTING
To install the plastic clip units to 35mm industrial DIN rail, place the top edge
of the included mounting bracket on the back of the unit against the DIN rail at
a 15° angle as shown. Rotate the bottom of the unit to the back (away from you)
until it snaps into place.
1 2
3 4
5 6
7 8
PWR
108TX
Powered by
4.22
(107.19)
3.53
(89.62)
3.50
(88.90)
1.49
(37.85)
1.71
(43.43)
3.50
(88.90)
3.80
(96.52)
1 2
3 4
104TX
PWR
Powered by
3.53
(89.62)
1.49
(37.85)
4.22 (107.19)
3.97 (100.95)
3.53 (89.62)
2.87
(72.90)
3.17
(80.52)
1.49
(37.85)
2.87
(72.90)
PWR
Powered by
2 3
4 5
105TX
1
DIMENSIONS In inches (mm)
DIMENSIONS In inches (mm)