Red Lion CSDIO - Manual (Page 5)

LEDS
STS – STATUS LED
The Status LED is a dual color LED that provides information regarding the
state of the module. This includes indication of the various stages of the start-up
routine (power-up), as well as any errors that may occur.
Startup Routine
Error States
ALM – ALARM LED
The Alarm LED indicates the presence of a fault condition.
FIRMWARE UPGRADE
The module’s firmware is stored in flash memory so that software/hardware
conflicts are avoided, and so that software features may be added in the future.
During a download, Crimson compares its own library of firmware files with
those stored in the Master module. If they do not match, Crimson will download
the necessary files. The Master then checks to make sure that the I/O modules
contain the same firmware. If they contain a different revision, the Master will
automatically copy those files into the module's flash memory. During this
process, the module LEDs will flash rapidly, starting with the top row, and
progressing through the remaining rows until the process is complete.
CONFIGURATION
Programming is done via Crimson, a Windows ® compatible configuration
interface. Please see the Crimson manual for more information.
5
ORDERING INFORMATION
TYPE MODEL NO. DESCRIPTION PART NUMBER
Master Module CSMSTR
Modular Controller Master, Multi Comms ports and Ethernet CSMSTRV2
Modular Controller Master with multiple protocol converter, data
logger, web server with Virtual HMI up to QVGA (320 x 240) size and
expansion slot.
CSMSTRSX
Modular Controller Master with multiple protocol converter, data
logger, web server with Virtual HMI up to VGA (640 x 480) size and
expansion slot with increased SDRAM
CSMSTRGT
Digital Modules CSDI014 1
Eight Inputs, Six Relay Outputs CSDIO14R
Eight Inputs, Six Solid State Outputs CSDIO14S
Communication
Cables (10 feet)
CBL
Programming Cable for CS, G3, & Paradigm Series CBLPROG0
Communications Cables 1 CBLxxxxx
Software
Crimson ® Programming Software 2 SFCRM
Crimson ® Programming Software, Manual, and Download Cable SFCRK
Accessories
Rail Stops (Qty 2) RSRSTP00
Replacement Base CSBASE00
Replacement Termination Plug CSTERM00
Note: Certain modules are not suitable for use in Hazardous locations. Check each module’s specifications prior to installation.
1 Visit www.redlion.net for a complete list of PID modules, data acquisition modules, communications drivers and cables.
2 Free at www.redlion.net
Solid Red Module not controlling, and not communicating.
Green/Pulsing Red
Module is controlling properly, but has lost
communication with the Master.
Module performing normally. Green
Module switching to configuration. Steady Red
Module is currently running the boot loader and/or
being flash upgraded by Crimson. This occurs for
four seconds during a power up.
Rapidly Flashing Red