Ronbow 619623 User Manual
Led and metal medicine cabinet

Rev. Oct, 2013
ronbow.com
INStALLAtION GUIDe
INStALLAtION SHeet
ACCESSORIES
MODEL: 618523
619623
LED AnD MEtAL MEDICInE CABInEt
MATERIALS NEEDED:
PHILIP SCREWDRIVER
STUD LOCATOR
LEVELING TOOL
MATERIAL PROVIDED:
(4)WOOD SCREWS
(4)MOUNTING HARDWARE
(2)GLASS SHELVES
(8)MOUNTING HARDWARE FOR SHELVES
NOTE:
locate the wire at the top of the cabinet. The qualified license electrician has the option to plug into a wall outlet, or hard
wire the cabinet by cutting the plug.
Circuit Breaker
If your new medicine cabinet has a built-in led then follow the section below.
ALL wIRINg ShOuLD bE DONE by A quALIfIED LIcENSED ELEcTRIcIAN.
wARNINg:
To reduce the risk of electrical shock, shut off power before wiring the cabinet.
cAuTION:
Requires 120V 20AMP circuit.
cAuTION:
This product must be connected to a grounded, metal permanent wiring system or an equipment-grounding
conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lean on the product.
cAuTION:
A LED option cabinet must be wired to a 20AMP GFI (ground fault interrupter) circuit breaker when used in
bathrooms and all other locations required by the national electric code.
Wall Terminal
Black
Black
White
White
Ground
20AMP CFI