Ronbow Corsica User Manual
Corsica
Installation Sheet
www.ronbow.com
Step 2 :
Step 3 :
Step 1 :
Ronbow Corporation, All Rights Reserved.
CORSICA
36”
Model:
073036
• Position countertop opening to ensure
clearance between the lavatory, faucet,
and backsplash
• Cut counter top opening
• Cut-out max: 8-1/2” Diameter
• Set sink and seal with silicone or
caulking
Vintage Collection
Step 4 :
Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop
(There may be a small beveled rubber washer
packaged with your drain, please discard this
and use plumbers’ putty instead)
See Figure 1.
From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty
See Figure 2.
Attach p-trap to tailpiece.
countertop
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Figure 1.
Drain
Note : For Self-Rimming Sinks
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
Figure 2. (DRAIN Model: D8002)
Sink :
Countertop :
200513
420819
200392
309337
315337
519037