Ronbow Angelica User Manual
Angelica, Step 2 : step 4, Step 5
RONBOW CORP
INSTALLATION GUIDE
ronbow.com
INSTALLATION SHEET
ANGELICA
23”
Neo-classic cllection
MODEL: 057223
step 1 :
step 3 :
Note :
DO NOT USE any adhesives with silicone.
Silicone will bond to the decorative finish
and cause permanent damage
step 2 :
step 4 :
Position and drill a 1-3/4” hole for the
drain on the countertop
Place mounting ring under the sink as
shown on the right
Drain assembly picture
Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty
step 5 :
Attach p-trap to tailpiece
Mounting Ring Detail
Vertical view
Horizontial view
Rubber
washer
Mounting ring
Bottom O-Ring
Rubber washer
Mounting Ring
Countertop
Metal Nut
Thick rubber
washer
Tailpiece
Drain Cap
Mounting Ring
Drain
Metal Nut
Tailpiece
P-trap
Thick rubber
washer
step 6 :
Secure top to cabinet by
using adhesive caulk