Ronbow Rowena User Manual

Rowena

Installation Sheet

www.ronbow.com

For installing WOOD top:

ROWENA

24”/32”/36”

For installing GLASS top:

Screw on chrome spacers (parts A, B, & C)

to leg support. Glass top is placed on top of

spacers.

Contempo Collection

Chrome spacers (parts A, B, & C) maybe used

but not necessary. Wood top may be placed

on spacers or may be glued to leg supports by

using silicone adhesives.

For installing STONE top:

Discard chrome spacers and use silicone

adhesive to secure top to leg support.

For installing leg support:

For installing towel bar (T):

Drill towel bar holders (part F) into each leg

support and insert towel bar (T). Use set screw

(part G) to tighten.

Drill screws (parts D &E) into wall through

holes in leg supports. There should be 4 holes

per each leg support. Please make sure there

is proper support behind the wall in your drill

location. Different wall materials may require

different screw types. Please consult your local

hardware store.

For installing bottom shelf(s):

The bottom shelf rests on the bottom ledge of

the leg supports. No adhesives are necessary.

Note: Towel bar (T), bottom Drawer and Bottom Shelf
(S) are optional and it must be purchased separately.

Step 1: Release the lever on each side, according to the
arrows and pull out drawer.
Step 2: screw to the side of the stand

Installing Bottom Drawer

Counter Top

Bottom Shelf (S)

Vanity:

Drawer:

500030

500033

667025

667033

667037