Vaisala MMT310 - Manual (Page 43)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 43
Set Time and Date
Syntax: TIME
Syntax: DATE
Sets the time and date to the transmitter.
Example:
>time
Current time is 04:12:39
Enter new time (hh:mm:ss) ? 12:24:00
>date
Current date is 2000-01-01
Enter new date (yyyy-mm-dd) ? 2013-06-30
>
NOTE Time and date are cleared to 2000-01-01 00:00:00 at reset.
NOTE Only about 1 % accuracy is obtained with the software clock.
Add Time and Date to SEND and R
Outputs
Syntax: FTIME x
Syntax: FDATE x
Where
x = ON/OFF
The command enables or disables output of time and date to the serial
line.
>send
aw= 0.2 aw T= 31.0 'C
>ftime on
Form. time : ON
>send
03:47:59 aw= 0.2 aw T= 31.0 'C
>fdate on
Form. date : ON
>send
2000-01-01 03:48:03 aw= 0.2 aw T= 31.0 'C
>