Auto Page autopage RS-850lcd - Manual (Page 5)

JAN/07/2003
RS850 OP 5
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
-
(C)
System’s Trigger Record
Check Press within 3 seconds
- -
(C)
System’s Status Check Press within 3 seconds
-
( )
Button Lock Press within 3 seconds and
Hold
button for 2 seconds
-
( )
Optional Driving Pager Press within 3 seconds
-
( )
Monitor Indoor Temperature Press within 3 seconds
-
( )
Daily Timer Start Press within 3 seconds
LCD screen lamp turns on for
5 seconds. Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter Press within 3 seconds
Warning: Press the button two times when the battery
compartment is empty, then insert the new battery.
B. BUTTON LOCK:
It is useful if you want to disable the transmission function of the remote
control temporarily to prevent from any inadvertent pressing of buttons by
others.
1. The regular remote control transmitter:
Press the button first, within 3 seconds press and hold th e ( )
button for 2 seconds to activate or cancel the button lock function. The
“Red LED” will pause flash for few seconds to indicate the remote control
transmitter is on “Button Lock” mode while press the transmitter button.
2. The 2-way remote control transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will displayed on the LCD screen to
show the LCD remote transmitter
is on “Button Lock
”.