beautypg.com

Auto Page autopage RS-850lcd User Manual

Page 10

background image

JAN/07/2003

RS850 OP

10

system must first be disarmed either by using your remote transmitter, or by
operating the Manual override sequence.

Enter Valet Mode:

1. From the disarmed condition,

turn the ignition to “ON” position.

2. Push and hold valet switch for 2

seconds until the LED turns on.
The LED wills remain on as long
as the system is in 'valet mode'.

Remote Door Lock

Remote Door Unlock

Exit Valet Mode:

1.Return to normal operation, turn ignition 'on'.

2.

Push and hold valet switch for 2 seconds, The LED wills turns off

indicate the system are exiting the valet mode.

L. CAR LOCATOR

Under armed mode, press the

button to active

car locator function. The siren will chirp 6 times.
The parking light will flash 12 times, for you to
easily locate your car.

M. PANIC FUNCTION:

(See Alarm Feature I – 7 Programming.)

The transmitter can be used as a remote panic switch to manually trigger the
alarm in case emergency.

1. Press and hold the

button for 3 second. The alarm

will immediately sound.

2. During panic mode, the normal function of this

transmitter button will be suspended. The transmitter

and

buttons can be used to lock and unlock

the door (if the option is installed), however once the

button is pressed, the vehicle’s starter disable

device, (where installed) will be enable allowing the
vehicle to start.

3. To stop the alarm, press and hold the transmitter

or

button on the

transmitter again for 3 seconds. Also if any transmitter button other than

or

button is pressed and released, the panic mode will be turned

off immediately.

4.

If the button is not pressed, the alarm will automatically stop after 60
seconds.