Auto Page autopage RS-850lcd User Manual

Page 23

JAN/07/2003

RS850 OP

1. Screen Lamp ON:

Press and hold the

button one second, with one

melody sound and the LCD
screen lamp will turns on for 5 seconds

2. Power Save Mode:

While the power save mode, the LCD remote

transmitter uses “0” current to save the battery power.

Entry: 1. Press & hold the

button for 5 seconds, with one

melody sound and

icon on the LCD screen to indicate

entry the “power save mode”.
2. Under the “Active Arming Mode” and Disarm mode. Turn the
ignition switch to on, the LCD remote transmitter will automatically
entry the “Power Save Mode”

Exit: Press any button of the LCD remote transmitter to exit the

“Power Save Mode”.

3. Clear the Flash Icon and Melody Sound:

Press the

button 3

times within 3 seconds will clear the
flash icon and melody sound on the LCD screen transmitter

4. Stop The Trigger Melody Sound:

While triggering the alarm the LCD

screen will alert user through melody sound and flashing trigger icon, press
any button on the LCD remote transmitter to stop melody sound only.

Button Lock:

It is useful if you want to disable the

transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.

Press the

button first, within 3 seconds press and

hold the

(

) button for 2 seconds to activate or cancel

the button lock function, the

icon will displayed on the

LCD screen to show the LCD remote transmitter is on
“Button Lock”.

6. Vibration / Melody Mode: