beautypg.com

Auto Page autopage RS-850lcd User Manual

Page 18

background image

JAN/07/2003

RS850 OP

18

parking light will flash (6) times. The siren chirps (6)
times. The vehicle is now programmed to start at the
real time of the next day. Your set time for the next
day engine start flashes for approx. 3 seconds on

the LCD screen. After 3 seconds the

icon stays

displayed on the LCD screen.

4. Press the brake pedal to stop th e vehicle running.

Exit the timer start: Timer start can be exited manually as follows:

1. Make sure the remote start system is not operating the engine.

2. Turn the ignition on. The LED and parking light will flash (4) times. The horn
chirps (4) times. Or

1. Press the

button twice to remote start the vehicle. As soon as the vehicle is

running and the parking light have turned on or flashing.

2.

Immediately depress the

button then press and hold the

button for 2

seconds. (or depresses

+

buttons, if you program

+

buttons =

Start / Stop button.) The parking light will flash (4) times. The siren or horn
chirps (4) times. The vehicle is no longer programmed to start automatically.


E. TEMPERATURE CHECK (OPTIONAL)

If you installed the optional temperature sensor, you can
monitor, Through the LCD screen, the present indoor
temperature of the passenger compartment before cooling
or heating your vehicle.

Press the transmitter

buttons first, within 3 seconds

press the

(

) buttons, the in-door temperature will be

shown on the LCD screen. This reading may be higher than
actual ambient temperature due to the greenhouse and is
relative only the inside vehicle temperature.

F. TO TURN OFF THE REMOTE START:

When the engine is running (by remote start), if you want
to stop it,

1. Press

button once on the remote transmitter under

remote start mode.

2. Move the optional remote start enable toggle switch to

OFF position. (If installed)

3. Press the brake pedal

The vehicle will shut down and turn off the parking light to
indicate engine stopped.

G. SHUT-DOWN INPUT FOR REMOTE STARTER:

If any of the following conditions exist while the system is operating, the
engine will not start or will shut down immediately: