Checkers Linebacker 1 Channel Cable Ramps User Manual
Heavy duty general purpose, 1 channel system, Assembly instructions

ASSEMBLY:
• Inspect areas for safety hazards
• Assemble sections by aligning female connectors over male connectors
• Press with foot to secure female connectors to male connectors
• Install cables as required:
Open Top Model: Install cable/hose line down into channel by pushing
cable or hose through slot into channel or bending protector backward
and length wise to allow larger diameter cable/hose lines through
slot and into channel.
Drop Over Model: Place the protector over the top of
exposed cable/hose.
• Test installation for intended use
• Periodically inspect installation
CHANNEL CAPACITY:
LOAD CAPACITY:
The Cable/Hose Protection System has different load supporting capabilities depending on type of vehicle and
temperature. Suitability must be verified by testing under actual conditions.
OPERATING TEMPERATURE:
-40
˚
F to 120
˚
F (-40
˚
C to 48
˚
C)
CHEMICAL RESISTANCE:
Tested for compatibility with common motor oils, gasoline and diesel fuel.
Limited resistance to brake fluids and other chemicals.
MATERIAL:
UV-stabilized polyurethane elastomer
NO. OF
CHANNELS
1 Channel
(1.25” Option)
11,700
lbs. (5,307 kg)
LOAD CAPACITY PER TIRE
MAX LOAD 70
˚
F (21
˚
C)
23,400
lbs. (10,614 kg)
1 Channel
(2.25” Option)
8,500
lbs. (3,856 kg)
17,000
lbs. (7,712 kg)
LOAD CAPACITY PER AXLE
MAX LOAD 70
˚
F (21
˚
C)
CABLE/HOSE MANAGEMENT COMPONENTS
ASSEMBLY INSTRUCTIONS
#ZIS-GP1
Ver: 2/11
CHANNEL CAPACITY - MAX. DIAMETER INCHES (mm)
1.25” Channel Option
1.25 in. (31.8 mm)
width x
1.25 in. (31.8 mm)
height
2.25” Channel Option
2.25 in. (57.2 mm)
width x
2.25 in. (57.2 mm)
height
Simply interlock with
T-connectors to extend
protection length.
36" Lineal Protector
Open Top Model
Drop Over Model
Drop over protectors do not prevent
abrasion to cable from below.
WARNING!
GP-
1
HEAVY DUTY
GENERAL PURPOSE
1 CHANNEL SYSTEM