Checkers Guard Dog 1 Channel Low Profile with ADA Ramps User Manual
Heavy duty low profile, 1, 2, 3 or 5 channel systems with ada ramps, Assembly instructions
ASSEMBLY:
• Inspect areas for safety hazards
• Assemble sections by aligning female connectors over male connectors
• Press with foot to secure female connectors to male connectors
• Open cover and install cables down into channels
• Close cover flush with base
• Test installation for intended use
• Periodically inspect installation
OPERATING TEMPERATURE:
-40˚F to 120˚F (-40˚C to 48˚C)
CHEMICAL RESISTANCE:
Tested for compatibility with common motor oils, gasoline
and diesel fuel. Limited resistance to brake fluids and other chemicals.
MATERIAL:
UV-stabilized polyurethane elastomer
LOAD CAPACITY:
The Cable/Hose Protection System has different load supporting capabilities depending on type
of vehicle and temperature. Suitability must be verified by testing under actual conditions.
CHANNEL CAPACITY:
ASSEMBLY INSTRUCTIONS
#ZIS-GDLP-ADA
Ver: 2/11
NO. OF
CHANNELS
5 Channel
34,000 lbs. (15,422 kg)
MAXIMUM LOAD PER TIRE
70
˚
F (21
˚
C)
68,000 lbs. (30,844 kg)
3 Channel
27,000 lbs. (12,246 kg)
54,000 lbs. (24,492 kg)
2 Channel
23,000 lbs. (10,432 kg)
46,000 lbs. (20,864 kg)
1 Channel
23,000 lbs. (10,432 kg)
46,000 lbs. (20,864 kg)
MAXIMUM LOAD PER AXLE
70
˚
F (21
˚
C)
CABLE/HOSE MANAGEMENT COMPONENTS
Simply interlock with
Dog Bone connectors to
extend protection length.
CHANNEL CAPACITY - MAX. DIAMETER INCHES (mm)
5 Channel
Center channel: 1.6 in. (40.6 mm) width x .75 in. (19.0 mm) height
Other 4 channels: 1.3 in. (33.0 mm) width x .75 in. (19.0 mm) height
3 Channel
Center channel: 2 in. (50.8 mm) width x .75 in. (19.0 mm) height
Other 2 channels: 1.25 in. (31.8 mm) width x .75 in. (19.0 mm) height
2 Channel
1.5 in. (38.0 mm) width x .75 in. (19.0 mm) height
1 Channel
2.25 in. (57.2 mm) width x .75 in. (19.0 mm) height
HEAVY DUTY LOW PROFILE
1, 2, 3 or 5 CHANNEL SYSTEMS
WITH ADA RAMPS
LOW PROFILE PROTECTORS
®
5 CHANNEL ADA
3 CHANNEL ADA
2 CHANNEL ADA
1 CHANNEL ADA