Checkers Guard Dog 5 Channel Cable Ramp with ADA Ramps - Manual

HEAVY DUTY
5 CHANNEL SYSTEM
WITH ADA RAMPS
ASSEMBLY:
• Inspect areas for safety hazards
• Assemble sections by aligning female connectors over male connectors
• Female connectors are not visible from top view of product
• Press with foot to secure female connectors to male connectors
• Guard Dog ADA Ramps also connect to standard Guard Dog and accessories
• Open cover and install cables down into channels
• Close cover flush with base
• Test installation for intended use
• Periodically inspect installation
CHANNEL CAPACITY:
LOAD CAPACITY:
The Cable/Hose Management
System has different load
supporting capabilities depending
on type of vehicle and temperature.
Suitability must be verified by
testing under actual conditions.
OPERATING TEMPERATURE:
-40˚F to 120˚F (-40˚C to 48˚C)
CHEMICAL RESISTANCE:
Tested for compatibility with common motor oils, gasoline and diesel fuel.
Limited resistance to brake fluids and other chemicals.
MATERIAL:
UV-stabilized polyurethane elastomer
ADDITIONAL CABLE/HOSE MANAGEMENT COMPONENTS
NO. OF
CHANNELS
5 Channel 10,500 lbs./Tire (4,763 kg)
LOAD CAPACITY PER TIRE
MAX LOAD 70˚F (21˚C)
21,000 lbs./Axle (9,526 kg)
LOAD CAPACITY PER AXLE
MAX LOAD 70˚F (21˚C)
Simply interlock with
Dog Bone connectors to
extend protection length.
CABLE PROTECTORS
®
ASSEMBLY INSTRUCTIONS
#ZIS-GD5ADA
Ver: 7/12
CHANNEL CAPACITY - MAX. DIAMETER INCHES (mm)
4 Channels
1 Channel (center)
1.339 in. (34.0 mm) width x 1.325 in. (33.65 mm) height
1.604 in. (43.3 mm) width x 1.325 in. (33.65 mm) height
36" Lineal Protector
18" Lineal ADA Ramp Protector 45˚ Right Turn
4-Way Cross
End Cap End Cap
45˚ Left Turn
ADA/DDA
COMPLIANT