ADTRAN HDSL2 - Manual (Page 49)

HDSL2 for General Distribution Installation and Maintenance Practice Control Port Operation
61223HDSL2L2-5B 39
System PM/Screen Report
The System PM/Screen Report option (
Figure 39 ) offers four types of reports on performance
monitoring. Selecting a report type will display all the reports for that category on the screen
at once, which is more efficient than accessing each menu individually.
Figure 39. System PM/Screen Report Option
Clear PM and Alarm Histories
The Clear PM and Alarm Histories option from the HDSL2 Main Menu initializes data from
performance monitoring and alarm histories. Selecting this option from the Main Menu
displays the prompt shown in
Figure 40 .
Figure 40. Clear PM and Alarm Histories
6. Scratch Pad, Ckt ID, Time/Date
7. Terminal Modes
8. Alarm History
9. Event History
10. System PM/Screen Report
11. Clear PM and Alarm Histories
12. Troubleshooting
13. Virtual Terminal Control
Selection: 10
Enable data logging now.
Select Report Type or Press Escape to cancel:
1) Full System/History Report
2) Current Status Report
3) System Configuration Report
4) Alarm/Event History
Circuit ID:HNTSVLALHDSL2 03/01/05 09:29:45
Adtran HDSL2 Main Menu
1. HDSL2 Unit Information
2. Provisioning
3. Span Status
4. Loopbacks and Test
5. Performance History
6. Scratch Pad, Ckt ID, Time/Date
7. Terminal Modes
8. Alarm History
9. Event History
10. System PM/Screen Report
11. Clear PM and Alarm Histories
12. Troubleshooting
13. Virtual Terminal Control
This will clear the PM, Alarm, Span Status, and
Troubleshooting Histories for all circuit elements.
Are you sure (Y/N)?
Selection: 11