Sandvik Coromant Silent tools - How to reduce vibration in metal cutting - Manual (Page 6)

Sandvik Coromant – How to reduce vibration in metal cutting 2
Turning
Practical tips and hints
on how to reduce vibrations
Chip jamming:
1. Increase the coolant flow.
2. Change the insert geometry.
3. Reduce the cutting speed.
Dimension and tolerance problems:
1. Choose a smaller nose radius.
2. Choose a more wear resistant grade.
3. If there is between 4 x D to 6 x D overhang choose a carbide bar.
4. If there is over 6 x D overhang, choose a Silent Tool.