Sandvik Coromant Silent tools - How to reduce vibration in metal cutting - Manual (Page 37)

Sandvik Coromant – How to reduce vibration in metal cutting 33
CoroMill 290 - A good 90-degree shoulder milling concept with four cutting
edges per insert for best economy. It´s the first choice for a square shoulder
facemill in short chipping materials (ISO-K) and hardened steel (ISO-H).
CoroMill 790 - A highly productive 90-degree shoulder milling cutter for a
number of different operations from roughing to finishing. The first choice
for ISO-N materials. Very good performance in helical interpolations and
boring.
Face Milling
CoroMill 245
CoroMill 245 - The first choice for face milling in most materials, from
roughing to finishing. It combines high metal removal rate with very good
surface finish. The 45-degree entering angle results in favourable axial
cutting forces which minimize the vibration tendencies.