Sandvik Coromant Silent tools - How to reduce vibration in metal cutting User Manual
Page 22
Sandvik Coromant – How to reduce vibration in metal cutting
18
operations in order to achieve the best results. It is particularly important
when working with overhangs stretching beyond 4 times the L/D ratio.
Sandvik Coromant also offers a full programme of conventional tool
holders.
Clamping with EasyFix sleeves for cylindrical bars:
EasyFix gives a fast and simple way to achieve correct indexing of centre
height when mounting cylindrical bars into the machine, due to its spring
loaded plunger design. Three EasyFix sleeves are available for clamping
small 5-25 mm boring bars.
CoroTurn SL Boring Bars:
All boring bars have through-tool coolant supply via slots, on bars having
diameters of 16 to 25 mm and through holes on the 32 to 60 mm range.
Cut off length
If shortening the bar, the minimum overall length from the serration after
shortening, is given in the table below. This length includes a four times the
diameter clamping length.
Bar
diameter
Design
570-3C
dm
m
Short
Long
16
100
155
20
125
200
25
155
255
32
190
320
40
240
410
50
305
520
60
380
630