Pure Contour - User Guide - Manual (Page 16)

16
Active and Standby operation
You can adjust the brightness level and the duration that the screen is illuminated when switched
on or in standby. Select Active operation to adjust the display settings that apply when Contour
is switched on or Standby operation to adjust the display settings that apply when Contour is in
standby.
Brightness By default, the display brightness is set to ‘Automatic’ in active and standby
modes, which means the that the brightness adjusts to suit the lighting level
around Contour. If you want to change this setting, tap Manual and use the
navigation buttons to adjust the brightness from 1 (low) to 10 (high), then tap
OK. You can switch back to automatic brightness by tapping Automatic.
Screen duration The length of time the screen is illuminated after a button is pressed. Choose
between Always on
(default) or Off after 7 seconds.