Outback Power Systems GFX International Series Installation Manual - Manual (Page 29)

Installation
900-0111-01-00 Rev B 27
Single-Inverter AC Installations
When installing an inverter AC system, the following rules must be observed.
¾ All overcurrent devices must be sized for 30 Aac or less.
¾ All wiring must be sized for 30 Aac or more.
¾ All output circuit breakers must be sized appropriately for loads and inverter wattage.
Figure 18 Single-Inverter Wiring
NOTES:
1. Neutral (common) conductor may be connected from only one inverter
neutral terminal to a common bus bar in the AC conduit box.
2. Colors depicted here may be different from wiring standards.