AT&T Cordless Telephone MLC-6 - Manual (Page 19)

Filling Out Labels
Using a ball-point pen or pencil only, write the following
information on the erasable labels and directory card:
On the labels above and below the
handset display, first peel off
the protective plastic overlay,
then write line numbers or
programmed features assigned to
each of the outside line/pro-
grammable buttons. See the above
illustration and Quick Reference:
Controls and Displays.
On the directory card, write any
important phone numbers, exten-
sion numbers, or Speed Dial
numbers you may want to have as
a reference. The directory card is
beneath the cover that contains
user instructions, on the top back
of the handset (behind the an-
tenna). To open the cover, push up
on the dots on the cover until the
cover locks into place.
On the handset extension label
(below the mouthpiece) and on the
base extension label, write the
phone's extension number.
NOTE:
If you use a pencil or ball-point pen on these labels, you will be
able to erase the information later. Do not use felt-tip or other
types of non-erasable markers. Also, do not remove the labels.
16