AT&T Cordless Telephone MLC-6 - Manual (Page 15)

Install mounting sleeves and Mount the base. Place the
screws. Lightly tap a nail into marks
on wall to start holes. Then slip each
screw into a mounting sleeve (with
screw head in wider barrel of sleeve
and screw securely into wall. base over the screws, than slide it
downward slightly to lock it into
place.
Plug modular telephone cord Plug power cord/adapter
into a modular wall jack. (Alterna-
tively, you can plug the cord
directly into a system 206 module,
but you must place the base at
least 20 feet from the 206 module.) into a properly grounded 3-prong
wall outlet.
If the base is mounted on a flat surface, slide the Quick Reference
under the base. If the base is wall-mounted, place the Quick
Reference near the base.
12