beautypg.com

Flaming River FR312PK Corvette Power Steering Pump Kit User Manual

Page 3

background image

1) Remove all belts from around the pulleys. Remove the
alternator mounting bracket, power steering pump
(if equipped with factory power steering)and the power steering
pump bracket. (Note: If vehicle is equipped with a 3 groove wa-
ter pump pulley, remove the outer pulley from the water pump
for power steering belt clearance.)

2) Using the two 3/8”-16x2.25 (13) mounting bolts, lock wash-
ers (24), flat washers (26) and spacers (19), assemble the new
Flaming River power steering pump bracket as shown.

3) Bolt the power steering pump bracket to the engine block on
the lower driver’s side as shown.