Flaming River C-10 Chevy Truck Rack and Pinion 1973-87 - Manual (Page 5)

Original Column Removal
Only perform these steps if using a new Flaming River Steering Column
1) Disconnect the column wiring connectors.
2) Remove the bolts that hold the column floor mount to the firewall.
3) Support the column and remove the bolts that retain the under dash mounting clamp.
4) Remove the factory steering column from the vehicle.
Steering Box and Linkage Removal
Before beginning you must first measure the width of your front end from LEFT outer tie rod end zerk to the RIGHT outer tie rod
end zerk to determine the overall width of your front end. Write dimension here for further reference
1) Remove the pitman arm nut and then the pitman arm from the steering box using a pitman arm puller.
73-87 C-10 Truck
Power Steering Rack and Pinion Cradle Kit
04/22/10
4