Flaming River C-10 Chevy Truck Rack and Pinion 1973-87 - Manual (Page 14)

Power Steering Pump Installation
Bleeding the System
1) Raise the front wheels off the ground and support vehicle on jack stands.
2) Turn the wheel to the left lock and fill the reservoir with high-quality power steering fluid and allow vehicle to sit for 2
minutes.
3) With the engine off and someone checking the fluid level rotate the steering wheel lock to lock 20 times filling with fluid
as necessary.
4) With the engine running, rotate the steering wheel back and forth from lock-to-lock. Repeat several times. Check fluid
level and add fluid if necessary.
5) Lower the vehicle on the ground and with the engine running, repeat step 4. Check fluid level and add if necessary.
73-87 C-10 Truck
Power Steering Rack and Pinion Cradle Kit
04/22/10
13