beautypg.com

Flaming River C-10 Chevy Truck Rack and Pinion 1973-87 User Manual

Page 11

background image

Universal Joint System

1) Loosen the set screws in the rack mounting blocks. – This will allow to you to adjust the pinion angle for proper u-joint

alignment.


2) Install support-bearing mount onto the inner front control arm bolt. (Picture below). Note: The angle of this mount is set for

most applications. Some adjustment may be necessary for the correct angle and u-joint alignment.

73-87 C-10 Truck

Power Steering Rack and Pinion Cradle Kit

04/22/10

10