Flaming River Tri-5 5 Power Rack and Pinion - Manual (Page 8)

Page 7 of 11
55-57 Chevy Rack & Pinion Installation
122809
JJ/RD
Removal of Original Steering System Con’t
16) Pivot the column downward and remove the column from the box shaft. Then remove the box from the car.
Installation of Flaming River Steering Column
1) Remove pivot ball (black arrow with dotted line) from assembly by removing the two socket head screws seen in picture with
the white arrow. Next slide the pivot ball over the column tube and then place the main body of the assembly over the pivot ball
and lightly snug the two socket head screws (white arrow). Attach the entire assembly to the floor as shown with the original
mounting bolts. (Black arrows with solid line)
2) Place the factory dash mount onto the new column and install the in the factory position. Then tighten the two socket head
screws (white arrow) from step 6.