Flaming River Tri-5 5 Power Rack and Pinion User Manual
Page 2
Page 1 of 11
55-57 Chevy Rack & Pinion Installation
122809
JJ/RD
Index
Note:
Before beginning you must first measure the width of your front end from LEFT outer tie rod end zerk fitting to the RIGHT
outer tie rod end zerk fitting to determine the overall width of you front end.
Write dimension here for further reference.
Note:
A front end alignment is necessary after installation.
Note:
Hoses (FR1625) and Hazard Wiring Kits are sold separately and are not included in this kit.
Note:
****
The use of Flaming River Headers maybe necessary with use of the Power Rack and Pinion System
. ****
Part No. FR50001 (Uncoated) or FR50001C (Coated)
Note:
Flaming River Recommends that you use Dextron or high grade power steering fluid.
Hazard Kit Part Numbers:
FR20115
1955 Chevy
FR20116
1956 Chevy
FR20117
1957 Chevy
Note: Part number ES381RL 68-69 Camaro Outer Tie Rod Ends must be used
with this kit.
A. Inventory
PG 2
B. Original Steering System Removal
PG 3-7
C. Steering Column Installation
PG 7-8
D. Cradle and Rack & Pinion Installation
PG 9
E. U-Joint Installation
PG 9-10
F. Power Steering Pump Bracket Installation
PG 10
G. Bleeding System
PG 11
Torque Specifications
PG 11
For technical support please contact:
Flaming River Industries
800 Poertner Dr Berea, OH 44017
1-800-648-8022 - www.flamingriver.com
WARRANTY DISCLAIMER: Flaming River’s® Limited Warranty
Flaming River® warrants its products to be free from defects in material and workmanship for a period of one (1) year after the
date of purchase, except that: All steering columns are warranted for a period of three (3) years from the date of purchase.
Flaming River’s® warranty liability is limited to the replacement of defective products. Flaming River® is not liable for any labor
costs associated with any warranty claim, or for any incidental or consequential damages. Improper installation, abuse, racing,
and/or modification of the products voids this warranty. No warranty of merchantability or fitness for a particular purpose is made
by Flaming River® with respect to any of its products. Warnings and Recommendations It is the customer’s responsibility to
determine the suitability of a given Flaming River® product for the customer’s uses. Likewise, it is the customer’s responsibility to
install a Flaming River® product. Contact the vehicle manufacturer whenever installing a switch to confirm the appropriateness of
using such a switch and the recommended placement of the switch on the vehicle. Use qualified chassis specialists for the
installation of all steering related components. Be aware that the installation of certain Flaming River® products may adversely
impact a manufacturer’s warranty with respect to certain vehicles and other manufactured goods. Flaming River will repair or
replace any product found to be defective in material or workmanship. Improper installation, abuse, racing and/or modification
VOID WARRANTY. Flaming River® is not responsible for any labor costs associated with any warranty.