Flaming River Camaro Rack & Pinion Cradle Kits 1967-69 - Manual (Page 3)

Original Column Removal
1) Remove the pinch bolt that retains the rag joint (B-2) to the steering box.
2) Remove the bolts that hold the column floor mount to the firewall.
3) Support the column (B) and remove the bolts that retain the under dash
mounting clamp (B-1).
4) Disconnect the column wiring and remove the steering column (B) from
the car.
Steering Box and Linkage Removal
1) Remove the pitman arm from the steering box (C) using a pitman arm
puller.
2) Remove the two bolts that retain the idler arm to the frame rail.
3) Remove the cotter pins and castle nuts and separate the outer tie rod
ends from the spindles.
4) Next remove the steering linkage (D) from the car.
5) If you have power steering remove the lines from your power box, pump
and pump brackets. A shorter belt may need to be installed.
6) Remove the three bolts that retain the box to the frame rail and remove
the box from the car.
67-69 Camaro
Power Steering
10/17/2005
2