Aussie VANTAGE 6122S8X641 - Manual (Page 34)

34
How to Clean the Burners
1. Make sure the Control Knobs are turned “Off” and the grill is completely cooled.
2. Carefully remove the Warming Rack, Cooking Grids and Flavor Activator.
3. To remove the Main Burner, first unplug the electrode wire from the back of the Ignitor Button. (see Step 19B).
Next, remove the screws securing the burner to the bowl (under bowl - Step 16B). Last, carefully slide burner up
and back to disengage from valve nozzles and lift out of Bowl.
4. To remove the Side Burner, remove the screw securing the burner to the side table (under side table - Step 18C)
5. Use a pipe cleaner to clear insect nests from the inlet hole of Main Burner (Fig. 10) and Side Burner tube. (Fig. 11)
6. Open up the Main Burner holes (Fig. 10) and the Side Burner holes (Fig. 11) with a small nail or wire. Use a non-
metallic brush to remove food particles and corrosion from the Burner surfaces.
In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the
grill has been stored for an extended period of time.
Burner
Valve Nozzle
Control Knob
Spider webs or nest
inside Venturi Tube
Fig. 9
Fig. 10
Non-metallic
Wire Brush
Pipe Cleaner
Open up Burner
holes with a small
nail or wire.
Side Burner tube
Fig. 11
Pipe Cleaner