Aussie VANTAGE 6122S8X641 - Manual (Page 14)

14
.39” Bolts and
Nuts at front
.79” Bolts at rear
Step 13
Side Tables to Cart Assembly
Attach the Left and Right Side Tables to the cart with 2) 1/4-20 x .39” Bolts and 1/4-20 Nuts each, first to the Front Side
Table Support then second to the control panel end flange with 2) 1/4-20 x .39” Bolts. Last, install the 2) 1/4-20 x .79”
Bolts at the rear supports. Attach one side table at a time. Install the front .39” bolts and nuts but do not tighten com-
pletely. Install the .79” bolts through the rear supports into the rear U-leg. Tighten all Side Table fasteners securely.
1/4-20 x .39” Bolt
8 pcs
1/4-20 x .79” Bolt
4 pcs
Step 13A (Model 6122 ONLY)
Side Burner Valve Assembly
Attach the Side Burner Valve to the inside of the left side table face. Insert the valve stem out through the large hole in
the side table face and align the small holes. Insert 2) M4 x .31” bolts through the front of the side table face into the
threaded holes in the valve bracket and tighten.
M4 x .31” Bolt
2 pcs
1/4-20 Nut
4 pcs
Install these first