Aussie VANTAGE 6122S8X641 - Manual (Page 19)

19
Step 20
Hood Handle Assembly
Attach the Hood Handle to the Hood with 2) 1/4-20 x .39” Bolts and Fiber Washers. Align Handle as shown in side
view. Place Heat Baffles between the Handle and the Hood, orienting baffles so they align with the end of the handle.
1/4-20 x .39” Bolt
2 pc
Fiber Washer
2 pc
Step 21
Hood/Hinge Assembly
Place Hood on Bowl and align hinges. Hood hinge legs insert between Bowl hinge legs. Install Hood Hinge Axle
through holes in hinge legs, inserting towards the center of the grill. Fasten in place by inserting Axle Pin through small
hole in Axle. Repeat for other Hinge.
Hood Hinge Axle
2 pc
Axle Pin
2 pc
Thermal Baffle
2 pc
1/4-20 x .39” Bolt
Fiber Washer
Thermal Baffle
Side View