Aussie VANTAGE 6122S8X641 - Manual (Page 13)

13
Step 11
Shroud to Cart Assembly
Place the shroud on the cart frame with the shroud brackets to the inside of the cart legs. Fasten the shroud in place
with 4) 1/4-20 x .39” Bolts through the shroud brackets into the threaded inserts on the inside of the front cart legs.
1/4-20 x .39” Bolt
4 pc
Step 12
Wheel Assembly
Insert the Axle through the Wheel then through the sleeve in the bottom of the leg tube. Fasten in place by inserting an
Axle Pin through the small hole near the end of the axle.
Axle
Axle Pin
Axle Pin
Axle
Model 6122 with side
burner valve is shown
here. Be sure to route
hoses in FRONT of legs
and out the side above
the Shroud.