DAVIS CABLE BUDDY - Manual

INSTRUCTIONS
#420
One lube nut
#421
Two lube nuts
CABLE BUDDY™ makes steering easier and safer on boats
with inboard, outboard, or inboard / outboard steering cables.
Prevents corrosion and freezing, lubricates otherwise inaccessi-
ble inner cable. Seals the critical area of the steering cable from
moisture intrusion while allowing delivery of proper oil to the
cable. 7/8" x 14 threads fit Johnson / Evinrude and all Japanese
outboard motors.
Three parts of the Cable Buddy system:
• Cable Buddy™ lube nut, made of marine grade stainless
steel, comes with sealing washer and plug. Cable Buddy II
(#421), with two lube nuts, is designed for the twin cable steer-
ing systems used on some high performance boats.
• Oiling tube assembly.
• Max-Lube™, the ideal lubricant for steering cables. Max-Lube
has high water separation properties and
affords corrosion protection in extreme condi-
tions. Maintains flow at temperatures as low
as –40°F (–40°C).
Installing Cable Buddy now saves the hassles
and expense of buying a new cable later.