DAVIS DriveRight Installation - HD Addendum User Manual
DAVIS For the car
Table of contents
Document Outline
- DriveRight® Stainless Steel Strap Mounting Instructions
- Installation Instructions
- 1. Measure the neoprene rubber strip. Wrap it around the driveshaft at the location where the mag...
- 2. Install the magnet into the holder and slide the stainless steel cable tie into the holder, se...
- 3. Place the neoprene rubber strip around the driveshaft and loosely wrap the stainless steel cab...
- 4. Proceed to the tightening instructions for the tightening tool you have.
- “Screwdriver” type tightening tool
- 1. Trim the stainless steel cable tie using cutters or tin snips so that 2” remains protruding fr...
- 2. Insert the end of the stainless steel cable tie into the slot at the end of the tightening too...
- 3. When the desired amount of tension has been reached and the magnet is secure, slide the tool o...
- “Squeeze Handle” Type Tightening Tool