Yetter 2984 Series Generation II Maverick Opener - Manual (Page 26)

26
ASSEMBLY INSTRUCTIONS
STEP 7. An eccentric bushing allows centering of the close wheels on the row. To properly apply pressure
on both sides of the slot when closing the trench. When adjusted properly, the closing wheels are centered
on the trench. To adjust, loosen the ½” x 6 ½” hex bolt that attaches the closing wheel assembly to the
wheel mount bracket. Rotate eccentric bushing with wrench to align closing wheel assembly with center of
trench. Tighten bolt that attaches closing wheel arm to wheel mount bracket.