Allied Telesis SB251-13 - Manual (Page 61)

Patch SB251-13 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches 61
Patch SB251-13 for Software Release 2.5.1
C613-10361-00 REV M
was correctly connected to another port) then the trunk group speed should
have applied to all the ports in the trunk, but it did not. Similarly, if a port
was added to a trunk group, and the port status was ‘down’, but it was later
linked correctly, then the trunk group speed should have applied to the
ports in the trunk. This issue has been resolved.
After auto negotiation had finished between two ports, the port on the
SwitchBlade would not show link up status when the SHOW SWITCH
PORT command was executed. The auto negotiation process is now
restarted if auto negotiation is completed and the link is shown as down.
The LEDs on line cards now continue to flash when activity exists.
Previously if a cable was connected and disconnected to Line 48 and G8
ports, with traffic being transmitted from the other end, then the LED
would stop flashing, even when there was activity on the link.
Features in SB251-03
Patch file details are listed in Table 7.
Patch SB251-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.5.1, and the following enhancements:
The SwitchBlade mirror port field on the second instance of a switch chip
was displaying as though it was the first instance. For example, if 2.26 was
configured as the mirror port, the GUI mirror object would return 2.2. The
first chip instance was not affected. This issue has been resolved.
TCP6 did not send a TCP Reset message under some circumstances, for
example when the Telnet server was disabled. This issue has been resolved.
A buffer address was incrementing and not returning buffers for reuse
when the command line interface was accessed via the GUI interface. This
issue has been resolved.
If the SET SWITCH BLADE command was executed with the default
settings, then the default settings were added to the configuration file. The
PCR: 03243 Module: SWI Level: 2
PCR: 03249 Module: SWI Level: 4
Table 7: Patch file details for Patch SB251-03.
Base Software Release File sb-251.rez
Patch Release Date 12-Mar-2003
Compressed Patch File Name sb251-03.paz
Compressed Patch File Size 68784 bytes
PCR: 02361 Module: SWI Level: 4
PCR: 02527 Module: TCP Level:3
PCR: 03025 Module: GUI Level:2
PCR: 03055 Module: SWI Level: 4