Figure #1 – Turbo Action 34186A/A-1 Ford C4 1970-Up Street Manual/Automatic Valve Body (PRND21) User Manual
Page 2
![background image](/manuals/405200/2/background.png)
Part #34186A-1
2
1/79,7/90,12/91,1/92,6/92,
10/96,1/97,4/97,8/99
STEP #11:
Adjust intermediate band located on driver’s side near shift lever. Take a 3/4” box wrench
and break locknut loose. Now holding locknut from turning, take a small 3/8” open end
wrench and turn square adjustment lug clockwise until wrench feels snug (10 in/lbs).
Carefully back off (CCW) one (1) full turn only. Holding the adjustment lug, tighten lock
nut to 35 ft/lbs (tight).
STEP #12:
Add three (3) quarts of a well-known brand of Type “F” OR Mercon Ford transmission fluid.
STEP #13:
Start motor and add transmission fluid until dip stick reads approx. 1 pint low or the add mark.
STEP #14:
Take vehicle out and drive normally around the block. Now re-check transmission oil
level. Add oil if necessary, but DO NOT OVERFILL!
Figure #1
Do NOT install till all other bolts are
started.
DETENT BRACKET
Pressure Relief Spring & Valve