Turbo Action 23951 Turbo Hydro 350 Tranz Brake (PRN123) User Manual

Cheetah pro brake drag only valve body (prn123)

Part #23951

10/93,7/97,9/98

CHEETAH PRO BRAKE DRAG ONLY VALVE BODY (PRN123)

(No Gear Braking in 1st or 2nd )

POSITIVELY NOT FOR STREET USE

Turbo Hydro “350” & “375B”

1969-80 (Non-Lockup)

Part #23951

SPECIAL NOTE:
This valve body can be installed without removing transmission, however for quickest reaction
times and maximum longevity of transmission the internal changes should be performed at
your earliest convenience.

FIRST, READ INSTRUCTIONS CAREFULLY, THEN PROCEED TO INSTALL VALVE BODY
BY FOLLOWING EACH STEP INDIVIDUALLY.

INCLUDES:

1 - Valve Body
1 - 17258

5/16” ball Bearing

1 - 23040

Special Plug

1 - 23096P

2-3 Performance Plate

1 - 23099C

Pan Gasket

1 - 23100M

Spacer to Valve Body Gasket

1 - 23101M

Spacer to Case Gasket

1 - 23500-1

Special Valve Body Spacer Plate

1 - 23520

Spring Modulator Valve

1 - 24158

Modulator O-ring

1 - 24280A

Tranz Brake Solenoid (Two Wire)

2 - 00781A

Terminals

2 - 00782A

Terminals

1 - 23131

1/4”

Freeze Plug

Installation Instructions

STEP #1:

Transmission should be cool before installing. Also, place gear shift selector in
neutral. If vehicle is on the ground, secure so it will not roll.

1535 Owens Road, Jacksonville, FL 32218 (904)741-4850

FAX (904)741-4853