Turbo Action 24941 Turbo Hydro 400 Tranz Brake (PRN123) - Manual

Part #24941 1 10/91,7/99,4/02,3/03,12/06,3/14
1535 Owens Road, Jacksonville, FL 32218
Phone 904-741-4850 * Fax 904-741-4853
www.turboaction.com
Reverse Shift Pattern (PRN123) No Engine Braking in 1st & 2nd
Turbo Hydro “400”
1965 – Up
Installation Instructions
The Turbo Action CHEETAH Pro Series Tranz Brake gives you the same clean and positive shifts that you have come
to expect from a CHEETAH VALVE Body. In addition, you now have a Tranz Brake which will allow you to compete in
Pro Light Classes as well as full tree Brackets. Special features include: Tranz Brake works in first gear only; no
extra horsepower loss due to high line pressures; exclusive “Power Lock” brake system circuitry; ultra quick release;
high reliability; easy installation (no internal modifications required, but best results when done).
Options that should be considered:
1. Turbo Action Tranz Box (includes special intermediate sprag which fits 1965-70 direct
clutch drum only).
2. Turbo Action Pro Series Converter
The following are the suggested clearances for your Turbo 400 with Tranz Brake:
Forward Clutches: Five Clutch Clearance= 0.040 - 0.050
Intermediate Clutches: Three Clutch Clearance= 0.080 - 0.105
Direct Clutches: Five Clutch Clearance= 0.060 - 0.070
Special characteristics about your CHEETAH Valve Body:
1. First gear - No engine braking
2. Second gear - No engine braking
3. Third gear - Normal engine braking
4. Line Pressure: 165 - 190 PSI
CAUTION - CAUTION: Do Not Neutral transmission during shut down. Slow down in high gear only.
Failure to do so may cause major internal damage to transmission, vehicle and
yourself due to the transmission will possibly lock up!
CHEETAH PRO SERIES TRANZ BRAKE VALVE BODY
(Not for Street Use)
Part #24941